
Warning signs
- Spots that flex, bounce or feel spongy when you walk on them
- Dark, stained or swollen boards (water damage)
- Holes, cracks or broken edges, especially at the rear where forklifts enter
- Boards that have pulled loose from the crossmembers
- Daylight visible through the floor
What causes floor damage
Water
Roof leaks, bad door seals and Houston humidity let water soak into wood floors. Wet wood rots from the inside out, so a floor can look fine while it's getting weaker.
Forklifts and heavy point loads
Forklift wheels concentrate a lot of weight on a small area. Over time that cracks boards, especially near the doors and over weak spots.
Age and wear
Years of loading and unloading wear down the boards and loosen the fasteners holding them to the crossmembers.
Repair options
Section replacement
If the damage is in one area, the bad boards can be cut out and replaced with new hardwood, fastened to the crossmembers. This is the most common floor repair.
Larger floor replacement
When rot or damage covers a big part of the floor, replacing more of it at once is often the better value.
Fix the source
Replacing boards without fixing the roof leak or door seal that caused the damage means doing it again soon. Check the roof, corner caps and door seals at the same time.
See a real floor board replacement in Our Work.
More trailer repair guides · All services · ZIP codes we serve