Listen first
With the trailer aired up, the engine off and the area quiet, walk around the trailer slowly and listen. Most leaks are loud enough to hear. Check with the brakes released, then again with the brakes applied — some leaks only show up one way.
The usual suspects
Gladhand seals
The rubber seals in the gladhands crack and flatten over time. They're the most common leak point and one of the cheapest fixes.
Air lines and fittings
Lines get rubbed through, kinked or crushed, and fittings work loose from vibration. Look closely where lines pass near sharp edges or moving parts.
Brake chambers
A leaking diaphragm in a service or spring brake chamber often shows up as a leak only when the brakes are applied. A damaged spring brake chamber can be dangerous to work on and should be handled by a mechanic.
Valves
Relay valves and other control valves can leak from their exhaust ports when internal seals wear out.
Air suspension
On air-ride trailers, cracked or worn air bags and leaking leveling valves can let the trailer sag and lose air.
The soapy water test
If you can't hear it, spray soapy water on fittings, gladhands and connections. Bubbles show you exactly where the air is escaping. Never put your hands or face near a leaking spring brake chamber.
Why you shouldn't ignore a small leak
- Leaks can keep brakes from applying with full force
- The truck's compressor works harder to keep up
- Small leaks usually get bigger, often at the worst time
- Air leaks are a common reason trucks get flagged at inspections
Common air system repairs
- New gladhand seals or gladhands
- Replacing damaged air lines and fittings
- Brake chamber replacement
- Valve replacement
- Air bag and leveling valve replacement
- Slack adjuster replacement and adjustment while the brakes are being worked on
More trailer repair guides · All services · ZIP codes we serve